|
|
|
Sort Order |
|
|
|
Items / Page
|
|
|
|
|
|
|
| Srl | Item |
| 1 |
ID:
104972
|
|
|
|
|
| Publication |
2011.
|
| Summary/Abstract |
Presented in this study is an empirical analysis of embodied carbon dioxide emissions induced by fossil fuel combustion for the world divided into three supra-national coalitions, i.e., G7, BRIC, and the rest of the world (ROW), via the application of a multi-region input-output modeling for 2004. Embodied emission intensities for the three coalitions are calculated and compared, with market exchange rate and purchase power parity separately used to investigate the difference between nominal and real production efficiencies. Emissions embodied in different economic activities such as production, consumption, import, and export are calculated and analyzed accordingly, and remarkable carbon trade imbalances associated with G7 (surplus of 1.53 billion tons, or 36% its traded emissions) and BRIC (deficit of 1.37 billion tons, or 51% its traded emissions) and approximate balance with ROW (deficit of 0.16 billion tons, or 3% its traded emissions) are concretely revealed. Carbon leakages associated with industry transfer and international trades are illustrated in terms of impacts on global climate policies. The last but not least, per capita consumption based emissions for G7, BRIC, and ROW are determined as 12.95, 1.53, and 2.22 tons, respectively, and flexible abatement policies as well as equity on per capita entitlement are discussed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 |
ID:
125434
|
|
|
|
|
| Publication |
2013.
|
| Summary/Abstract |
There are continuous debates around the question of whether CDM really contributes to sustainable development (SD) in host countries. Employment impact is an essential indicator of SD. Based on an input-out approach this research builds a quantitative assessment model to evaluate the employment impacts of CDM. Both direct and indirect jobs creation and job losses of CDM projects in the power sector registered by the end of 2011 are calculated by project types and power grids where the project is located. Results of this study show that, although the above mentioned CDM projects causes about 99,000 net direct job losses, they also create about 3.08 million indirect jobs, resulting in the gross employment of CDM to be about 2.98 million. Thereof, hydro projects induce both direct and indirect job losses, which comes to approximately 0.89 million. Solar projects have the most potential since they own the highest indirect jobs created by one GWh generation, about 104 jobs/GWh.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
ID:
126537
|
|
|
|
|
| Publication |
2013.
|
| Summary/Abstract |
In China, most energy prices are controlled by the government and are under-priced, which means energy subsidies existing. Reforming energy subsidies have important implications for sustainable development through their effects on energy price, energy use and CO2 emission. This paper applies a price-gap approach to estimate China's fossil-fuel related subsidies with the consideration of the external cost. Results indicate that the magnitude of subsidies amounted to CNY 1214.24 billion in 2008, equivalent to 4.04% of GDP of that year. Subsidies for oil products are the largest, followed by subsidies for the coal and electricity. Furthermore, an input-output model is used to analyze the impacts of energy subsidies reform on different industries and general price indexes. The findings show that removal of energy subsidies will have significant impact on energy-intensive industry, and consequently push up the general price level, yet with a small variation. Removing oil products subsidies will have the largest impact, followed by electricity, coal and natural gas. However, no matter which energy price increases, PPI is always the most affected, then GDP deflator, with CPI being the least. Corresponding compensation measures should be accordingly designed to offset the negative impact caused by energy subsidies reform.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
ID:
104973
|
|
|
|
|
| Publication |
2011.
|
| Summary/Abstract |
Managing urban energy system is vital for energy conservation and CO2 reduction. Integrating energy input-output model with carbon emission pinch analysis, we propose a framework for managing urban energy system. This framework could analyze current energy demands and CO2 emissions, predict their future possibilities and optimize energy mix of key sectors under CO2 emission constraints. Key sectors are identified by the energy input-output table from both direct and accumulative perspectives. Moreover, taking Suzhou, a typical manufacturing center and export-oriented city in China, as a case example, energy metabolism of Suzhou in 2020 is predicted using energy input-output model. And three sectors named Coking, Smelting and pressing of metals and Production and supply of electric power are identified to have big effects on CO2 emissions. Subsequently, energy mix of three identified key sectors is optimized under CO2 emission constraints by the carbon emission pinch analysis. According to the results, clean energy sources will occupy a great position in Suzhou's future energy demands. And the reuse of wastes as energy sources should be limited to achieve CO2 mitigation targets. Finally, policy implications of results and future work are discussed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5 |
ID:
110383
|
|
|
|
|
| Publication |
2011.
|
| Summary/Abstract |
Investigating CO2 emissions of China's manufacturing centers contributes to local and global CO2 mitigation targets. This study considers Jiangsu Province as a representation of manufacturing centers in South China. Effects of material efficiency improvements, technology development, consumption structure changes and consumption volume growth in Jiangsu Province on its CO2 emissions during 1997-2007 are investigated using structural decomposition analysis based on environmental input-output table. In order to reduce CO2 emissions, Jiangsu Province should not only rely on material efficiency improvements and technology development, but also rely on consumption structure changes. For consumption structure changes in detail, Jiangsu Province should not only focus on fixed capital formation and urban residential consumption, but also focus on international and intranational imports and exports. For the implementation of material efficiency improvements and technology development, Jiangsu Province should focus on technology innovation and international technology transfer. For the implementation of consumption structure changes, Jiangsu Province should mainly focus on identified sectors for each separate final demand category: five sectors for urban residential consumption, three sectors for fixed capital formation, four sectors for international exports, five sectors for intranational exports, three sectors for international imports and four sectors for intranational imports.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|